Fast Frank Racing (www.fastfrankracing.com) sent two sets of fuel injectors for service. One pair from an 848 Ducati, and the other pair from a Ducati Paul Smart 1000. It was surprising to see the differences in spray patters of the two pairs of injectors. Although the Paul Smart is a bigger displacement V-twin engine, it
How Is This For A “Before – After” Case Study ! 2 Ducati Fuel Injectors, One Injector Seriously Clogged.
Recently D&D Cycles in Pensacola, Florida ( www.danddcycles.com ) sent us a pair of Ducati Monster fuel injectors for ultrasonic cleaning service. Putting the fuel injectors on the ASNU diagnostic machine, it was clear there was a problem with at least one of the injectors. Flow rate of the injector on the left was 1/2
Recently we serviced some Honda CBR1000 fuel injectors for a customer. They were in pretty good shape overall but even after multiple ultrasonic cleaning cycles, some of the fuel injectors simply flowed different than the majority of fuel injectors. Luckily we had additional injectors on hand we were able to get a more even flow
Greg Melka, co owner of ProFlow Technologies fuel injector cleaning service company, won his first CCS roadracing national championship at the 2012 CCS Race of Champions. The “winner take all” event is held every year at Daytona International Speedway in Daytona Beach Florida. The ROC is the year end event where the racers are gridded
So last week we had a customer with a 2008 GSXR 600 send some fuel injectors he had purchased from Ebay. His bike was running rough and a mechanic had assured him a faulty fuel injector was to blame. Unfortunately neither of them knew about our fuel injector service and he bought another complete set
Changing Fork Springs on a Yamaha R6 with 25mm Ohlins forks. And Don’t Forget to Service Your Fuel Injectors!
For anyone that is track riding regularly, or racing motorcycles, you will at some point need to change for springs to a softer or firmer rate. It is not that difficult to do if you have the drop in cartridge kit like a 25mm Ohlins system. First, loosen the triple clamp fork bolt. Not doing
So you want a few extra horsepower up top on your Yamaha R6? The air filter snorkel removal is an easy way to get the engine more air. More air, more power. The 3rd generation Yamaha R6 has a “snorkel” on the intake side that was designed to reduce engine air intake noise. This snorkel
This is more of a testimonial, but we thought it was an informative article at the same time. Early KTM fuel injectors have many, but very small, spray openings, and seem to be more prone to clogs than other model fuel injectors. Even relatively new KTM dirt bikes have had issues with running rough, and
So we got a set of 2005 GSXR1000 fuel injectors in the ProFlow shop the other day for ultrasonic cleaning service. According to the mechanic and shop owner that sent them, the bike did not run horrible, but power seemed to be lower than expected. Sure enough, once on the ASNU machine and the spray patters were visible, a
Do not make the mistake of mixing upper fuel injectors from the 2006-07 R6, with upper fuel injectors from a 2008 or newer R6. The injectors look exactly the same . The 2006 and 2007 Yamaha R6 looks the same as the 2008 to 2012 R6. It would take a rider or mechanic, who is very familiar with these